Crafting With Turquoise Posted on 03 Feb 09:16 , 0 comments

The turquoise is ancient. Again, and again, it finds itself back in fashion. Its shining sky blue is one of the most popular trend colors in the world of jewelry and fashion. Turquoise fixing is one of the branches of handicraft which holds the beauty and attraction of a good hand-crafted product. It is believed that the antiquity of this industry goes back to about seventy years ago. At that time a Yousef Hakiman known as Mohammadreza started the craft of turquoise fixing on jewelry in Mashhad. About twenty years after that, the craft was brought to Isfahan by another craftsman named Hadjdadash and today he is continuing the job in Isfahan.

Turquoise fixed products are generally constructed of jewels and containers made of metals such as copper, brass, silver, nickel, or bronze on which small pieces of turquoise stones are placed side by side with special glue which gives specific beauty to the object.

Stages of Turoquoise Fixing 

  • Goldsmith's Trade: It is the construction and preparation of the desired object by one of the above-mentioned metals. This is done by the goldsmith or metalworkers by hand, press, or both. After making the general frame of the object whether it is a container or jewelry, the part that should be turquoise fixed is marked and a thin wire of the same metal is used and soldered to specify the boundary which is commonly called "carving" .
  • Turquoise Fixing: The desired turquoise in this art is of "soft" type which is accompanied with amounts of dirt and stone fragments, which should be separated from the stone. The turquoise small pieces are then grouped according to their color and size.

Shellac Powder

In the next stage the desired object is heated and a layer of "walnut shellac" powder is sprayed on it. The shellac powder is almost melted and covers the surface of the work piece which is sticky, soft and in a melting state.

The turquoise stones, which are already prepared, are placed on the work piece. The pieces of stone should be placed near each other in a way that there shall be the least space between them. After this stage the product is ready and is abraded by special devices and finishing is performed on it to make it ready for the market.

Importance of Proper Installation

The important point for the quality of turquoise fixing is the proper installation of the turquoise on the surface of the metal so that it is secured and when finishing operation is performed, the pieces do get loose or separated from the work piece. The second important point is that the more the turquoise container is decorated with turquoise pieces, and the more the pieces are arranged in an orderly manner with less space among them with the symmetry of the sub-base, as well as beauty and care and attention of the craftsman in polishing and finishing, the more its art value and quality will be.

Turquoise inlay is a common handcraft in Isfahan. In the process of inlaying turquoise the given container is heated and during heating nut lacquer is sprayed on the parts on which turquoises are supposed to be laid . sand paper is used to polish and varnish lacquer coated parts. Later turquoise-inlaid-parts are polished using olive or sesame oil to make it glossy.

In many cultures of the Old and New Worlds, this turquoise has been esteemed for thousands of years as a holy stone, a bringer of good fortune or a talisman. It really does have the right to be called a "gemstone of the people"!


Written by Crafihouse.com of craftihouse.com
Craftihouse.com , Center of Original handmade